Typ SKD - Recirculating unit Typ SKC - SCHNEEBERGER

CAD model selection

	1
	2
	3
	4
	5

		LINA Bill of material	TYP Typ ⁿ/ₐ	B [mm]	DW [mm]	F [mm]	H [mm]	J [mm]	L [mm]	L1 [mm]	L3 [mm]	N [mm]	A [mm]	D [mm]	E Thread ⁿ/ₐ	FK [mm]	F1 [mm]	G [mm]	M [mm]	O [mm]

		SKD 6-100	SKD 6-100	15	6.0	28.9	24.5	22.9	100	1 x 50	25	15.0	1.0	9.5	M6	5.20	2	9.8	19.7	4.4
		SKD 6-150	SKD 6-150	15	6.0	28.9	24.5	22.9	150	2 x 50	25	15.0	1.0	9.5	M6	5.20	2	9.8	19.7	4.4
		SKD 9-150	SKD 9-150	22	9.0	45.1	39.0	36.7	150	1 x 100	50	26.0	1.5	10.5	M8	6.80	3	15.8	32.4	6.3
		SKD 9-200	SKD 9-200	22	9.0	45.1	39.0	36.7	200	1 x 100	50	26.0	1.5	10.5	M8	6.80	3	15.8	32.4	6.3
		SKD 12-200	SKD 12-200	28	12.0	57.1	49.0	45.9	200	1 x 100	50	32.0	2.0	13.5	M10	8.50	3	19.8	40.2	7.7

Additional Information

Users who viewed this, were also interested in

Typ NRT - Recirculating unit Typ NRT

Typ NRT - Recirculating unit Typ NRTSCHNEEBERGER 06.12.2022

Typ SR - Recirculating unit Typ SR

Typ SR - Recirculating unit Typ SRSCHNEEBERGER 06.12.2022

Typ NRV - Introduction wedge Typ NRV

Typ NRV - Introduction wedge Typ NRVSCHNEEBERGER 06.12.2022

Typ SKC - Recirculating unit Typ SKC

Typ SKC - Recirculating unit Typ SKCSCHNEEBERGER 06.12.2022

Typ R - Linear Bearings Typ R

Typ R - Linear Bearings Typ RSCHNEEBERGER 20.01.2022

322/322D - Independent 3 way rotating joints

322/322D - Independent 3 way rotating jointsFarbo 08.04.2019

GRH - Straight high-speed rotating joints

GRH - Straight high-speed rotating jointsFarbo 08.04.2019

STR-S - Top jaw blanks with fastening groove

STR-S - Top jaw blanks with fastening grooveSCHUNK 22.11.2023

ML 40 - Moteur latéral Ø 40

ML 40 - Moteur latéral Ø 40Apore 01.02.2013

SCHNORR-Load Washer DIN 6796

SCHNORR-Load Washer DIN 6796Schnorr 23.11.2021

Typ SK - Recirculating unit Typ SK

Typ SK - Recirculating unit Typ SKSCHNEEBERGER 06.12.2022

NDN Type 2SCHNEEBERGER 06.12.2022

Typ RD - Linear Bearings Typ RD

Typ RD - Linear Bearings Typ RDSCHNEEBERGER 20.01.2022

MINIRAIL MNNL 42

MINIRAIL MNNL 42SCHNEEBERGER 06.12.2022