HG180A_semiF - Mounting holes - KANA (Katayama Chain)

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15

		LINA Bill of material	TYPE Type ⁿ/ₐ	NOT Number of teeth ⁿ/ₐ	DP Pitch dia [mm]	DC Teeth bottom dia [mm]	DC2 Caliper dia [mm]	DO Outer dia [mm]	T Width of teeth [mm]	MAT Hardeningtempering ⁿ/ₐ	MATC Comments hardeningtempering ⁿ/ₐ	SDAV Bore allowance [μm]	CAUTION Caution ⁿ/ₐ

		KANA_HG180A12D36	HG180A	12	220.81	185.10	185.10	248	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A14D36	HG180A	14	256.83	221.12	221.12	285	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A15D36	HG180A	15	274.88	239.17	237.66	303	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A16D36	HG180A	16	292.94	257.23	257.23	322	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A17D36	HG180A	17	311.02	275.31	273.98	340	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A18D36	HG180A	18	329.11	293.40	293.40	358	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A20D36	HG180A	20	365.33	329.62	329.62	395	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A21D36	HG180A	21	383.45	347.74	346.67	413	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A22D36	HG180A	22	401.57	365.86	365.86	432	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A24D36	HG180A	24	437.84	402.13	402.13	468	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A25D36	HG180A	25	455.98	420.27	419.37	487	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A30D36	HG180A	30	546.74	511.03	511.03	578	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A32D36	HG180A	32	583.06	547.35	547.35	615	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A35D36	HG180A	35	637.56	601.85	601.21	669	33.0	Induction hardening		0/+25	The tooth profile in the ...
		KANA_HG180A38D36	HG180A	38	692.06	656.35	656.35	724	33.0	Induction hardening		0/+25	The tooth profile in the ...

Additional Information

Users who viewed this, were also interested in

KANA (Katayama Chain)

HG200A_semiF - Mounting holes

HG200A_semiF - Mounting holesKANA (Katayama Chain) 27.06.2023

KANA (Katayama Chain)

HG200A - Un-finished

HG200A - Un-finishedKANA (Katayama Chain) 27.06.2023

DRC, DRCS - Idler Sprockets - Single Bearings

DRC, DRCS - Idler Sprockets - Single BearingsMisumi 07.06.2021

KANA (Katayama Chain)

80A - Un-finished

80A - Un-finishedKANA (Katayama Chain) 27.06.2023

KANA (Katayama Chain)

100A - Un-finished

100A - Un-finishedKANA (Katayama Chain) 27.06.2023

Tsubakimoto Chain Co.

RS160 sizeTsubakimoto Chain Co. 06.12.2023

KANA (Katayama Chain)

NK80B - for Bearing (Step hole)

NK80B - for Bearing (Step hole)KANA (Katayama Chain) 27.06.2023

SP80B - Sprocket 80B

SP80B - Sprocket 80BMisumi 07.06.2021

KANA (Katayama Chain)

HG80A - Un-finished

HG80A - Un-finishedKANA (Katayama Chain) 27.06.2023

KANA (Katayama Chain)

HG100-2A - Un-finished

HG100-2A - Un-finishedKANA (Katayama Chain) 27.06.2023

KANA (Katayama Chain)

NK160B/NK160C - for Bearing (Step hole)

NK160B/NK160C - for Bearing (Step hole)KANA (Katayama Chain) 27.06.2023

DRCW - Idler Sprockets - Double Bearings Type

DRCW - Idler Sprockets - Double Bearings TypeMisumi 07.06.2021

GKETC - 模数2/凸缘型

GKETC - 模数2/凸缘型A&T-3D Gallery 24.04.2024

KANA (Katayama Chain)

40A - Un-finished

40A - Un-finishedKANA (Katayama Chain) 27.06.2023