WGRM - Ball/Socket Joint, Metric sizes, right-hand thread - igus

CAD model selection

	1
	2
	3
	4

		LINA Bill of material	ARTNR Part no. ⁿ/ₐ	AZZK Max. axial tensile force (ball stud axis) - Short term [N]	ADZK Max. axial compressive force (pivoting axis) - Short term [N]	AZPK Max. axial tensile force (housing axis) - Short term [N]	AZSK Max. axial tensile force in housing axis with metal ball stud - Short term [N]	AZZL Max. axial tensile force (ball stud axis) - Long term [N]	ADZL Max. axial compressive force (pivoting axis) - Long term [N]	AZPL Max. axial tensile force (housing axis) - Long term [N]	AZSL Max. axial tensile force in housing axis with metal ball stud - Long term [N]	D1 Diameter [mm]	D2 Gewinde ⁿ/ₐ	D4 Diameter [mm]	L1 Length [mm]	L2 Length [mm]	L5 Length [mm]	L6 Length [mm]	H1 Height [mm]	H2 Height [mm]	H3 Height [mm]	A Width [mm]	B Width [mm]	E Width [mm]	S1 Width across flats ⁿ/ₐ	SW1 Max. pivot angle [°]

		WGRM-05	WGRM-05	30	200	100	600	15.0	100	50	300	8	M5	12.8	9	10.2	14	8.2	10.8	0.65	25.60	22	28.4	11	SW8	25
		WGRM-06	WGRM-06	35	300	140	800	17.5	150	70	400	10	M6	14.8	11	12.5	16	10.5	12.3	0.70	30.90	25	32.4	13	SW9	25
		WGRM-08	WGRM-08	250	500	200	1500	125.0	250	100	750	13	M8	19.3	13	16.5	18	13.5	16.2	1.15	39.15	30	39.7	16	SW12	25
		WGRM-10	WGRM-10	250	900	400	1900	125.0	450	200	950	16	M10	24.0	16	20.0	20	16.0	20.0	1.15	48.00	35	47.0	18	SW14	25

Additional Information

Users who viewed this, were also interested in

DryLin® SHT - Basic

DryLin® SHT - Basicigus 12.09.2022

iglidur® X - type S - inch sizes

iglidur® X - type S - inch sizesigus 19.01.2021

WGRM LC - Winkelgelenk, metrische Abmessungen, Rechtsgewinde, Low-Cost

WGRM LC - Winkelgelenk, metrische Abmessungen, Rechtsgewinde, Low-Costigus 19.01.2021

KBRM - Metric sizes, right-hand thread

KBRM - Metric sizes, right-hand threadigus 19.01.2021

KALM - Metric sizes, left-hand thread

KALM - Metric sizes, left-hand threadigus 19.01.2021

KARM - Metric sizes, right-hand thread

KARM - Metric sizes, right-hand threadigus 19.01.2021

DryLin®SET - easytube end fixed

DryLin®SET - easytube end fixedigus 12.09.2022

JFRM-JFLM-SG - High helix lead screw nuts with flange, made from iglidur® J

JFRM-JFLM-SG - High helix lead screw nuts with flange, made from iglidur® Jigus 01.05.2020

iglidur® Q - type F - metric sizes

iglidur® Q - type F - metric sizesigus 19.01.2021

CWM - Carbon Fibre Shaft, mm

CWM - Carbon Fibre Shaft, mmigus 12.09.2022

SWM - Steel Shaft, mm

SWM - Steel Shaft, mmigus 12.09.2022

GEFM - Spring-Loaded-Pins, Metric sizes

GEFM - Spring-Loaded-Pins, Metric sizesigus 19.01.2021

GELMK - Metric sizes, left-hand thread,with clevis pin and circlip

GELMK - Metric sizes, left-hand thread,with clevis pin and circlipigus 19.01.2021

GELMKE - Metric sizes, left-hand thread, with clevis pin and circlips, used in combination with series E rod end bearings

GELMKE - Metric sizes, left-hand thread, with clevis pin and circlips, used...igus 19.01.2021