10m³/h (nominal flow), PN25 - Wilo

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12

		LINA Bill of material	ARTICLE_ID Article number ⁿ/ₐ	ARTICLE_NAME Type code ⁿ/ₐ	MANUFACTURER_NAME Manufacturer ⁿ/ₐ	DESCRIPTION_SHORT Short text ⁿ/ₐ	DESCRIPTION_LONG Tender text ⁿ/ₐ	PRODUCT_DESCRIPTION Product description ⁿ/ₐ	ETIM_CLASS__EC_ ETIM Class (EC) ⁿ/ₐ	EF000010 Model ⁿ/ₐ	EF023038 Pump casing material ⁿ/ₐ	EF023143 Quality class of pump casing ⁿ/ₐ	EF011652 Material pump wheel ⁿ/ₐ	EF024149 Material pump wheel ⁿ/ₐ	EF004250 Material of connection ⁿ/ₐ	EF025877 Material quality connection ⁿ/ₐ	EF014904 Volume flow rate (BEP) [m³/h]	EF014905 Head at flow rate (BEP) [kPa]	EF000991 Max. discharge flow [m³/h]	EF000992 Max. static height [m]	EF020449 Max. operating pressure [bar]	EF003701 Electrical connection ⁿ/ₐ	EF000536 Cable length [mm]	EF003977 Rated voltage [V]	EF000351 Number of phases ⁿ/ₐ	EF005455 Frequency [Hz]	EF000001 Nominal current [A]	EF012425 Motor power output (P2) per motor [kW]	EF013710 Minimum Efficiency Index (MEI) ⁿ/ₐ	EF023092 Insulation class acc. to IEC ⁿ/ₐ	EF001642 Rotational speed [1/min]	EF020121 Motor speed control ⁿ/ₐ	EF020120 Type of speed control ⁿ/ₐ	EF023093 Motor with extended shaft ⁿ/ₐ	EF015266 Communication ⁿ/ₐ	EF007178 Radio standard Bluetooth ⁿ/ₐ	EF007179 Radio standard 2G / 3G / 4G ⁿ/ₐ	EF016383 Radio standard 2G / 3G / 4G ⁿ/ₐ	EF016385 Radio standard 5G ⁿ/ₐ	EF016386 Interface signal 0-10 V / 2-10 V ⁿ/ₐ	EF016387 Interface signal 0-20 mA / 4-20 mA ⁿ/ₐ	EF016388 Interface PT100 / PT1000 / PTC ⁿ/ₐ	EF016389 Interface Pulse Width Modulation (PWM) ⁿ/ₐ	EF016390 Interface pulse counter ⁿ/ₐ	EF003626 Potential free switch contact ⁿ/ₐ	EF007314 With communication interface RS-485 ⁿ/ₐ	EF007312 With communication interface RS-232 ⁿ/ₐ	EF007521 Supporting protocol for EtherNet/IP ⁿ/ₐ	EF003055 Supporting protocol for KNX ⁿ/ₐ	EF003052 Supporting protocol for PROFIBUS ⁿ/ₐ	EF007525 Supporting protocol for PROFINET IO ⁿ/ₐ	EF016391 Supporting protocol for CAN/CANOpen ⁿ/ₐ	EF016392 Supporting protocol for Modbus TCP ⁿ/ₐ	EF016393 Supporting protocol for Modbus RTU ⁿ/ₐ	EF016394 Supporting protocol for BACnet MS/TP ⁿ/ₐ	EF016395 Supporting protocol for BACnet IP ⁿ/ₐ	EF016396 Supporting protocol for LON/LONWorks ⁿ/ₐ	EF016397 Supporting protocol for LIN Bus ⁿ/ₐ	EF023182 Medium temperature (continuous) [°C]	EF002386 Ambient temperature [°C]	EF025116 Connection on supply side ⁿ/ₐ	EF025117 Diameter of connection on supply side ⁿ/ₐ	EF025503 Outer pipe diameter connection inlet side [mm]	EF026143 Flange compression stage connection inlet [bar]	EF014906 Connection standard inlet side ⁿ/ₐ	EF025977 Connection outlet side ⁿ/ₐ	EF025118 Diameter of connection on delivery side ⁿ/ₐ	EF025504 Outer pipe diameter connection outlet side [mm]	EF026233 Flange compression stage connection outlet [bar]	EF014907 Connection standard outlet side ⁿ/ₐ	EF001339 Flange shape ⁿ/ₐ	EF020038 Self-priming ⁿ/ₐ	EF005474 Degree of protection (IP rating) ⁿ/ₐ	EF004265 Recess length [mm]	EF023086 Pump height [mm]	EF000167 Weight [kg]	EF004663 Explosion-proof ⁿ/ₐ	EF014908 Standard motor ⁿ/ₐ	EF014979 Motor efficiency class ⁿ/ₐ	EF016015 With protection against dry running ⁿ/ₐ	EF008837 Approval ⁿ/ₐ	MECHANICAL_SEAL Mechanical seal ⁿ/ₐ	EF023103 With oval counterflanges ⁿ/ₐ	A Angle electrical cabinet [°]	A1 Angle to first bolt hole [°]	A2 Angle to first bolt hole [°]	B1 Thickness flange (incl. sealing edge) [mm]	B2 Thickness flange (incl. sealing edge) [mm]	BO1 Width oval flange [mm]	BO2 Width oval flange [mm]	D1 Outer diameter of flange [mm]	D2 Outer diameter of flange [mm]	DO1 Outer pipe diameter connection [mm]	DO2 Outer pipe diameter connection [mm]	D21 Diameter bolt hole [mm]	D22 Diameter bolt hole [mm]	D41 Diameter sealing edge [mm]	D42 Diameter sealing edge [mm]	DN1 Nominal inner diameter [mm]	DN2 Nominal inner diameter [mm]	F1 Thickness sealing edge [mm]	F2 Thickness sealing edge [mm]	H1 Pump height [mm]	DM Diameter motor [mm]	H2 Height to bottom side electrical cabinet [mm]	H3 Distance to centre connection [mm]	H4 Distance to bottom side motor [mm]	H5 Thickness foot [mm]	H6 Distance to fastening [mm]	K1 Pitch circle [mm]	K2 Pitch circle [mm]	L1 Connection length [mm]	L2 Connection length [mm]	LE4 Width electrical cabinet [mm]	LE5 Length electrical cabinet [mm]	LE7 Centre pump to top side electrical cabinet [mm]	LH1 Centre-to-centre holes [mm]	LH2 Centre-to-centre holes [mm]	LO1 Length oval flange [mm]	LO2 Length oval flange [mm]	N1 Number of bolt holes ⁿ/ₐ	N2 Number of bolt holes ⁿ/ₐ	Z1 Working length [mm]	Z2 Working length [mm]	BF3 Dimensions [mm]	BF4 Dimensions [mm]	BF5 Dimensions [mm]	BF6 Dimensions [mm]	B4 Dimensions [mm]	B5 Dimensions [mm]	B7 Dimensions [mm]	B8 Dimensions [mm]	B9 Dimensions [mm]	B10 Dimensions [mm]	B11 Dimensions [mm]	CF1 Dimensions ⁿ/ₐ	CF2 Dimensions ⁿ/ₐ	DIAMD1 Dimensions [mm]	DIAMD2 Dimensions [mm]	D3 Dimensions [mm]	D4 Dimensions [mm]	DL1 Dimensions [mm]	DL2 Dimensions [mm]	H0 Dimensions [mm]	H7 Dimensions [mm]	H8 Dimensions [mm]	H9 Dimensions [mm]	H10 Dimensions ⁿ/ₐ	H11 Dimensions [mm]	H12 Dimensions [mm]	L4 Dimensions [mm]	L5 Dimensions [mm]	L7 Dimensions [mm]	L8 Dimensions [mm]	L9 Dimensions [mm]	L12 Dimensions [mm]	R1 Dimensions [mm]	B Angle bracket [°]

		4162503	4162503	Helix EXCEL 1004-2/25/V/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1004-2/25/V/K...	EC011334	Vertical	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	0	0	19.0	53.35	25.0	Terminals	0	400	3	50. 60	4.80	2.2	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-15.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	925.0	53.9	0	EC motor	IE5	no	no	BQ1VGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	925	206	597	175	597	20	265.5	110	110	140	140	232	300	255	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	115	13.5	180	149	95	158.5	22.5	0	0.0	0	320	187	410	183	0	0	181	180
		4162507	4162507	Helix EXCEL 1005-2/25/V/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1005-2/25/V/K...	EC011334	Vertical	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	0	0	19.0	73.77	25.0	Terminals	0	400	3	50. 60	6.40	3.2	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-15.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	963.0	55.2	0	EC motor	IE5	no	no	BQ1VGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	963	206	635	175	635	20	303.5	110	110	140	140	232	300	248	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	115	13.5	180	149	95	158.5	22.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171903	4171903	Helix EXCEL 1002-2/25/V/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1002-2/25/V/K...	EC011334	Vertical	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	0	0	17.5	25.95	25.0	Terminals	0	400	3	50. 60	1.88	1.1	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-15.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	840.0	50.4	0	EC motor	IE5	no	no	BQ1VGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	840	206	512	175	512	20	190.5	110	110	140	140	232	300	255	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	100	13.5	180	149	95	158.5	12.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171907	4171907	Helix EXCEL 1007-2/25/V/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1007-2/25/V/K...	EC011334	Vertical	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	0	0	18.0	98.94	25.0	Terminals	0	400	3	50. 60	7.20	4.2	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-15.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	1250.0	70.0	0	EC motor	IE5	no	no	BQ1VGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	1250	224	840	175	840	20	393.5	110	110	140	140	232	300	256	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	240	13.5	180	149	95	270.5	25.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171915	4171915	Helix EXCEL 1009-2/25/V/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1009-2/25/V/K...	EC011334	Vertical	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	0	0	18.0	127.40	25.0	Terminals	0	400	3	50. 60	9.30	5.5	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-15.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	1325.0	86.0	0	EC motor	IE5	no	no	BQ1VGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	1325	224	915	175	915	20	468.5	110	110	140	140	232	385	280	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	240	13.5	180	149	95	270.5	25.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171923	4171923	Helix EXCEL 1010-2/25/V/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1010-2/25/V/K...	EC011334	Vertical	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	0	0	18.0	148.20	25.0	Terminals	0	400	3	50. 60	10.90	6.5	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-15.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	1385.0	91.9	0	EC motor	IE5	no	no	BQ1VGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	1385	250	952	175	952	20	505.5	110	110	140	140	232	385	280	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	240	13.5	180	149	95	270.5	25.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171931	4171931	Helix EXCEL 1012-2/25/V/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1012-2/25/V/K...	EC011334	Vertical	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	Stainless steel	X2CrNiMo17-12-2	0	0	18.0	174.40	25.0	Terminals	0	400	3	50. 60	12.50	7.5	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-15.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	1460.0	93.7	0	EC motor	IE5	no	no	BQ1VGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	1460	250	1027	175	1027	20	580.5	110	110	140	140	232	385	280	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	240	13.5	180	149	95	270.5	25.5	0	0.0	0	320	187	410	183	0	0	181	180
		4162512	4162512	Helix EXCEL 1005-1/25/E/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1005-1/25/E/K...	EC011334	Vertical	Stainless steel	X5CrNi18-10	Stainless steel	X2CrNi18-9	Stainless steel	X5CrNi18-10	0	0	19.0	73.77	25.0	Terminals	0	400	3	50. 60	6.40	3.2	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-30.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	963.0	55.2	0	EC motor	IE5	no	ACS. KTW. WRAS	BQ1EGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	963	206	635	175	635	20	303.5	110	110	140	140	232	300	248	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	115	13.5	180	149	95	158.5	22.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171912	4171912	Helix EXCEL 1007-1/25/E/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1007-1/25/E/K...	EC011334	Vertical	Stainless steel	X5CrNi18-10	Stainless steel	X2CrNi18-9	Stainless steel	X5CrNi18-10	0	0	18.0	98.94	25.0	Terminals	0	400	3	50. 60	7.20	4.2	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-30.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	1250.0	70.0	0	EC motor	IE5	no	ACS. KTW. WRAS	BQ1EGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	1250	224	840	175	840	20	393.5	110	110	140	140	232	300	256	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	240	13.5	180	149	95	270.5	25.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171920	4171920	Helix EXCEL 1009-1/25/E/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1009-1/25/E/K...	EC011334	Vertical	Stainless steel	X5CrNi18-10	Stainless steel	X2CrNi18-9	Stainless steel	X5CrNi18-10	0	0	18.0	127.40	25.0	Terminals	0	400	3	50. 60	9.30	5.5	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-30.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	1325.0	86.0	0	EC motor	IE5	no	ACS. KTW. WRAS	BQ1EGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	1325	224	915	175	915	20	468.5	110	110	140	140	232	385	280	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	240	13.5	180	149	95	270.5	25.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171928	4171928	Helix EXCEL 1010-1/25/E/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1010-1/25/E/K...	EC011334	Vertical	Stainless steel	X5CrNi18-10	Stainless steel	X2CrNi18-9	Stainless steel	X5CrNi18-10	0	0	18.0	148.20	25.0	Terminals	0	400	3	50. 60	10.90	6.5	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-30.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	1385.0	91.9	0	EC motor	IE5	no	ACS. KTW. WRAS	BQ1EGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	1385	250	952	175	952	20	505.5	110	110	140	140	232	385	280	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	240	13.5	180	149	95	270.5	25.5	0	0.0	0	320	187	410	183	0	0	181	180
		4171930	4171930	Helix EXCEL 1012-1/25/E/K...	WILO SE	Non-self-priming, highly ...	Highly efficient high-pre...	Helix EXCEL 1012-1/25/E/K...	EC011334	Vertical	Stainless steel	X5CrNi18-10	Stainless steel	X2CrNi18-9	Stainless steel	X5CrNi18-10	0	0	18.0	174.40	25.0	Terminals	0	400	3	50. 60	12.50	7.5	0.7	F	3500.0	Built-in	Continuously variable	no	Prepared	0	0	0	0	0	0	0	0	0	0	No	No	0	No	No	No	No	0	0	no	no	no	No	-30.0	-15.0	Flange	DN 40	40	PN 25	EN 1092-1	Flange;DN40-PN25-EN1092-1	DN 40	40	PN 25	EN 1092-1	Flange	no	IP55	280.0	1460.0	93.7	0	EC motor	IE5	no	ACS. KTW. WRAS	BQ1EGG	no	0	45	45	18	18	0	0	150	150	46	46	18	18	84	84	40	40	3.0	3.0	1460	250	1027	175	1027	20	580.5	110	110	140	140	232	385	280	110	110	0	0	4	4	140	140	0.00	0	0.00	0	440	252	462	183	0	0	0	0	0	151	10.8	152	240	13.5	180	149	95	270.5	25.5	0	0.0	0	320	187	410	183	0	0	181	180

Additional Information

Users who viewed this, were also interested in

16m³/h (nominal flow), PN16

16m³/h (nominal flow), PN16Wilo 15.04.2024

10m³/h (nominal flow), PN25

10m³/h (nominal flow), PN25Wilo 15.04.2024

2m³/h (nominal flow), PN16

2m³/h (nominal flow), PN16Wilo 15.04.2024

2m³/h (nominal flow), PN25

2m³/h (nominal flow), PN25Wilo 15.04.2024

4m³/h (nominal flow), PN25

4m³/h (nominal flow), PN25Wilo 15.04.2024

DKOL 90 ( ISO 12151-2 / ISO 8434-1 ) - Metric Females 24° Cone light series with O-Ring

DKOL 90 ( ISO 12151-2 / ISO 8434-1 ) - Metric Females 24° Cone light series...VOSS 13.03.2024

6m³/h (nominal flow), PN25

6m³/h (nominal flow), PN25Wilo 15.04.2024

With Frequency Converter

With Frequency ConverterWilo 15.04.2024

4m³/h (nominal flow), PN16

4m³/h (nominal flow), PN16Wilo 15.04.2024

6m³/h (nominal flow), PN16

6m³/h (nominal flow), PN16Wilo 15.04.2024

36m³/h (nominal flow), PN25

36m³/h (nominal flow), PN25Wilo 15.04.2024

Without Frequency Converter (RU)

Without Frequency Converter (RU)Wilo 15.04.2024

Non-return valve, both sides with tube connection - Tube connection according to DIN 2353 / ISO 8434-1

Non-return valve, both sides with tube connection - Tube connection accordi...VOSS 11.04.2023

IE5 70m³/h (nominal flow), PN25

IE5 70m³/h (nominal flow), PN25Wilo 15.04.2024