RJUM-06-HK - Manual clamps - igus

CAD model selection

	1
	2
	3
	4
	5
	6
	7

		LINA Bill of material	ARTNR Part no. ⁿ/ₐ	CNSMASSEXACT Weight [kg]	TOL Tolerance Bearing Inner Diameter [mm]	FMAX1 Fmax. dynamic P = 5 MPa [N]	FMAX2 Fmax. static P = 35 MPa [N]	K Clamping force ⁿ/ₐ	D1 Diameter [mm]	H Height [mm]	H1 Height [mm]	A Width [mm]	M Length [mm]	E1 Length [mm]	E2 Length [mm]	S Diameter [mm]	S1 Thread ⁿ/ₐ	S2 Diameter [mm]	N1 Height [mm]	N2 Height [mm]	L Length [mm]	KL Length [mm]	KB Length [mm]

		RJUM-06-12-HK	RJUM-06-12-HK	0.127	0.030 - 0.088	960	6720	400	12	18	35	43	21.5	32	23	8	M5	4.3	16.5	11	39	40	33
		RJUM-06-16-HK	RJUM-06-16-HK	0.207	0.030 - 0.088	1440	100080	400	16	22	42	53	26.5	40	26	10	M6	5.3	21.0	13	43	40	33
		RJUM-06-20-HK	RJUM-06-20-HK	0.331	0.030 - 0.091	2250	15750	400	20	25	50	60	30.0	45	32	11	M8	6.6	24.0	18	54	40	33
		RJUM-06-25-HK	RJUM-06-25-HK	0.665	0.030 - 0.091	3625	25375	1000	25	30	60	78	39.0	60	40	15	M10	8.4	29.0	22	67	65	46
		RJUM-06-30-HK	RJUM-06-30-HK	1.021	0.040 - 0.110	5100	35700	1000	30	35	70	87	43.5	68	45	15	M10	8.4	34.0	22	79	65	46
		RJUM-06-40-HK	RJUM-06-40-HK	1.835	0.040 - 0.115	8000	56000	1000	40	45	90	108	54.0	86	58	18	M12	10.5	44.0	26	91	65	46
		RJUM-06-50-HK	RJUM-06-50-HK	3.220	0.050 - 0.130	12500	87500	1000	50	50	105	132	66.0	108	50	20	M16	13.5	49.0	34	113	65	46

Additional Information

Users who viewed this, were also interested in

RTA - Pillow Block, Tandem Design, closed, mm

RTA - Pillow Block, Tandem Design, closed, mmigus 12.09.2022

RJUM-05 - Pillow Block, mm

RJUM-05 - Pillow Block, mmigus 12.09.2022

WAF - Shaft End Block, mm

WAF - Shaft End Block, mmigus 12.09.2022

FJUM-02 - Square Flange, mm

FJUM-02 - Square Flange, mmigus 12.09.2022

OGA - Pillow Block, open, Long Design, mm

OGA - Pillow Block, open, Long Design, mmigus 12.09.2022

PTGSG - Single start Trapezoidal Lead Screws

PTGSG - Single start Trapezoidal Lead Screwsigus 13.09.2022

EWUM-ES - Partially supported stainless steel shafts, mm

EWUM-ES - Partially supported stainless steel shafts, mmigus 12.09.2022

SWM - Steel Shaft, mm

SWM - Steel Shaft, mmigus 12.09.2022

WA - Shaft End Block, Standard Design, mm

WA - Shaft End Block, Standard Design, mmigus 12.09.2022

RJUM-06 - Standard Pillow Block, mm

RJUM-06 - Standard Pillow Block, mmigus 12.09.2022

DryLin® SLT - Lead screw driven linear axes with reduced installation height

DryLin® SLT - Lead screw driven linear axes with reduced installation heigh...igus 12.09.2022

GSQ - Linear Axes with Motor

GSQ - Linear Axes with Motorigus 13.09.2022

21240 - Slide carriages DryLin® W

21240 - Slide carriages DryLin® Wnorelem 30.04.2024

DEPA - Aschenbecher

DEPA - AschenbecherVigour 06.05.2022