KBK/L-I - Safety Couplings with Inner Cone - KBK Antriebstechnik

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10

		LINA Bill of material	SIZE Size ⁿ/ₐ	L Length (±2) [mm]	L3 Length [mm]	D Outer Diameter [mm]	D3 Centering Diameter (g6) [mm]	D4 Pitch Circle Diameter [mm]	D5 Flange Diameter [mm]	S Disengagement Travel [mm]	IG Thread(6x) ⁿ/ₐ	F Screw (ISO 4017) ⁿ/ₐ	TA Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm^2]	RPM Speed max. [1/min]

		KBK/L-I-10-6-3Nm-C-1	10	36	5	49	37	42	47	0.7	M3	M3	2.1	0.18	0.4	12000
		KBK/L-I-30-12-5Nm-C-1	30	45	6	64	47	53	60	1.2	M4	M5	6.0	0.54	2.2	9400
		KBK/L-I-60-15-13Nm-C-1	60	58	8	79	62	69	75	1.2	M5	M6	8.5	1.01	6.2	7800
		KBK/L-I-80-20-15Nm-C-1	80	60	10	94	68	80	90	2	M6	M6	14.0	1.72	15	6400
		KBK/L-I-150-20-50Nm-C-1	150	60	10	94	68	80	90	2	M6	M6	14.0	1.72	15	5500
		KBK/L-I-200-20-30Nm-C-1	200	66	10	109	80	90	105	2	M6	M6	14.0	2.00	24	5500
		KBK/L-I-300-25-60Nm-C-1	300	75	10	119	90	102	115	2	M8	M8	20.0	3.30	49	5000
		KBK/L-I-500-35-80Nm-C-1	500	75	10	129	100	112	125	2	M8	M8	26.0	4.70	83	4500
		KBK/L-I-800-50-260Nm-C-1	800	110	15	169	110	125	165	2	M12	M16	45.0	13.10	380	3500
		KBK/L-I-1400-50-450Nm-C-1	1400	110	15	169	110	125	165	2	M12	M16	80.0	13.20	385	3500

Additional Information

Users who viewed this, were also interested in

DryLin® E - Stepper Motors - NEMA17 - Stepper Motors

DryLin® E - Stepper Motors - NEMA17 - Stepper Motorsigus 12.09.2022

RJUM-11 - Lineargleitlager, mm

RJUM-11 - Lineargleitlager, mmigus 20.07.2021

DryLin® E - Stepper Motors - NEMA11 - Stepper Motors

DryLin® E - Stepper Motors - NEMA11 - Stepper Motorsigus 12.09.2022

GBM - Clevis pin

GBM - Clevis pinigus 19.01.2021

DryLin® TK-04 - Miniature | mm

DryLin® TK-04 - Miniature | mmigus 08.09.2022

KCLM - Metric sizes, right-hand thread

KCLM - Metric sizes, right-hand threadigus 20.07.2021

SAM - Metric sizes

SAM - Metric sizesigus 20.07.2021

EFOM HT - Metric sizes, with 2 Mounting Holes, High temperature

EFOM HT - Metric sizes, with 2 Mounting Holes, High temperatureigus 19.01.2021

JKM - Metric sizes, Low moisture absorption – iglidur® J; low friction values

JKM - Metric sizes, Low moisture absorption – iglidur® J; low friction valu...igus 19.01.2021

KGLM LC - Metric sizes, Low-Cost

KGLM LC - Metric sizes, Low-Costigus 20.07.2021

XUM-02 - Liner, short, closed design, high temperature

XUM-02 - Liner, short, closed design, high temperatureigus 20.07.2021

JUM-11 - Liner, lower clearance, mm

JUM-11 - Liner, lower clearance, mmigus 20.07.2021

DryLin® E - Stepper Motors - NEMA34 - Stepper Motors

DryLin® E - Stepper Motors - NEMA34 - Stepper Motorsigus 12.09.2022

JUM-02 - Liner, extra short, mm

JUM-02 - Liner, extra short, mmigus 20.07.2021