KBK/L-A - Safety Coupling with Outer Cone - KBK Antriebstechnik

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10

		LINA Bill of material	SIZE Size ⁿ/ₐ	L Length (±2) [mm]	L3 Length [mm]	D Outer Diameter [mm]	D3 Centering Diameter(g6) [mm]	D4 Pitch Circle Diameter [mm]	D5 Flange Diameter [mm]	S Disengagement Travel ⁿ/ₐ	IG Thread(6x) [mm]	F Screw (ISO 4017) ⁿ/ₐ	TA Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm^2]	RPM Speed max. [1/min]

		KBK/L-A-10-5-3Nm-C-1	10	37.5	5	49	37	42	47	0.7	M3	M3	2.1	0.18	0.4	12000
		KBK/L-A-30-12-5Nm-C-1	30	48.0	6	64	47	53	60	1.2	M4	M5	5.9	0.54	2.2	9400
		KBK/L-A-60-15-13Nm-C-1	60	66.0	8	79	62	69	75	1.2	M5	M5	8.7	1.01	6.2	7800
		KBK/L-A-80-20-15Nm-C-1	80	68.5	10	94	68	80	90	2	M6	M6	15	1.72	15.0	6400
		KBK/L-A-150-20-50Nm-C-1	150	68.5	10	94	68	80	90	2	M6	M6	15	1.72	15.0	5500
		KBK/L-A-200-20-30Nm-C-1	200	74.5	10	109	80	90	105	2	M6	M6	15	2.00	24.0	5500
		KBK/L-A-300-25-60Nm-C-1	300	83.5	10	119	90	102	115	2	M8	M8	25	3.30	49.0	5000
		KBK/L-A-500-35-80Nm-C-1	500	89.0	10	129	100	112	125	2	M8	M8	36	4.70	83.0	4500
		KBK/L-A-800-50-260Nm-C-1	800	118.0	15	169	110	125	165	2	M12	M12	85	13.10	380.0	3500
		KBK/L-A-1400-50-450Nm-C-1	1400	118.0	15	169	110	125	165	2	M12	M12	115	13.20	385.0	3500

Additional Information

Users who viewed this, were also interested in

DryLin® SHT - Basic

DryLin® SHT - Basicigus 12.09.2022

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistance

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistanceigus 19.01.2021

KBK Antriebstechnik

KBK/LL-P - Safety Coupling with Keyway

KBK/LL-P - Safety Coupling with KeywayKBK Antriebstechnik 26.11.2019

DryLin® ZLW-1040-LT - Belt drive – specialists

DryLin® ZLW-1040-LT - Belt drive – specialistsigus 12.09.2022

JUM-01 - Liner, mm

JUM-01 - Liner, mmigus 01.05.2020

DryLin® TK-02... - Heavy Duty | mm

DryLin® TK-02... - Heavy Duty | mmigus 08.09.2022

EWUMN - Low Level Supported Stainless Steel Shafts 1.4125, mm

EWUMN - Low Level Supported Stainless Steel Shafts 1.4125, mmigus 12.09.2022

WA - Shaft End Block, Standard Design, mm

WA - Shaft End Block, Standard Design, mmigus 12.09.2022

GELMF - Metric sizes, left-hand thread, with Spring-Loaded-Pins

GELMF - Metric sizes, left-hand thread, with Spring-Loaded-Pinsigus 19.01.2021

DryLin® SHTC-HYD - Hygienic design

DryLin® SHTC-HYD - Hygienic designigus 12.09.2022

DryLin® SHTP-FF - Fast Forward

DryLin® SHTP-FF - Fast Forwardigus 12.09.2022

EBLM - Metric sizes, left-hand thread

EBLM - Metric sizes, left-hand threadigus 19.01.2021

PKLM - Adapter Bolts, Metric sizes, left-hand thread

PKLM - Adapter Bolts, Metric sizes, left-hand threadigus 19.01.2021

WGRM - Ball/Socket Joint, Metric sizes, right-hand thread

WGRM - Ball/Socket Joint, Metric sizes, right-hand threadigus 19.01.2021