KBK/EPI - Safety Coupling with Keyway and Inner Cone - KBK Antriebstechnik

CAD model selection

	1
	2
	3
	4
	5
	6

		LINA Bill of material	SIZE Size ⁿ/ₐ	L Length ±1 [mm]	L1 Length [mm]	D Outer Diameter [mm]	D3 Hub Diameter [mm]	S Disengagement Travel [mm]	F Screw (ISO 4762) ⁿ/ₐ	TA Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm²]	KR Misalignment radial max. [mm]	KA Misalignment axial max. [mm]	KW Misalignment angular max. [°]	T Torque 98 ShA [Nm]	RPM Speed max. [1/min]

		KBK/EPI-14-65-N6-6-3Nm-C-...	14	65.0	24	49	30	0.7	M3	2.1	0.22	0.5	0.09	+1.0/-0.5	0.9	12.5	11690
		KBK/EPI-19-93-N10-12-5Nm-...	19	93.0	41	64	40	1.2	M5	6.0	0.72	2.9	0.06	+1.2/-0.5	0.9	17.0	8950
		KBK/EPI-24-111.5-N16-15-1...	24	111.5	48	79	55	1.2	M6	8.5	1.30	7.9	0.10	+1.4/-0.5	0.9	60.0	7630
		KBK/EPI-28-135-N20-20-50N...	28	135.0	59	94	65	2.0	M6	14.0	2.28	20.0	0.11	+.1.5/-0.7	0.9	160.0	6030
		KBK/EPI-38-151-N20-25-60N...	38	151.0	69	119	80	2.0	M8	20.0	4.60	69.0	0.12	+1.8/-0.7	0.9	325.0	4980
		KBK/EPI-42-175-N20-35-80N...	42	175.0	76	129	95	2.0	M8	26.0	8.75	156.0	0.14	+2.0/-1.0	0.9	450.0	4440

Additional Information

Users who viewed this, were also interested in

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistance

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistanceigus 19.01.2021

DryLin® SHT - Basic

DryLin® SHT - Basicigus 12.09.2022

KBK Antriebstechnik

KBK/EPA - Safety Coupling with Keyway and Outer Cone

KBK/EPA - Safety Coupling with Keyway and Outer ConeKBK Antriebstechnik 26.11.2019

KBK Antriebstechnik

KBK/EAP - Safety Coupling with Outer Cone and Keyway

KBK/EAP - Safety Coupling with Outer Cone and KeywayKBK Antriebstechnik 26.11.2019

DryLin® SHTC-HYD - Hygienic design

DryLin® SHTC-HYD - Hygienic designigus 12.09.2022

EBLM - Metric sizes, left-hand thread

EBLM - Metric sizes, left-hand threadigus 19.01.2021

KBRM - Metric sizes, right-hand thread

KBRM - Metric sizes, right-hand threadigus 19.01.2021

DryLin® SLW - Compact

DryLin® SLW - Compactigus 12.09.2022

REM - Metric sizes, Low Cost – iglidur® R; low friction values

REM - Metric sizes, Low Cost – iglidur® R; low friction valuesigus 19.01.2021

JDRM - drylin®-Disc, made from iglidur® J

JDRM - drylin®-Disc, made from iglidur® Jigus 13.09.2022

NT 35 - Telescopic System

NT 35 - Telescopic Systemigus 08.09.2022

RJI-01 - Solid Plastic Bearing, inch

RJI-01 - Solid Plastic Bearing, inchigus 20.07.2021

DryLin® E - Stepper Motors - NEMA23XL - Stepper Motors

DryLin® E - Stepper Motors - NEMA23XL - Stepper Motorsigus 12.09.2022

DryLin® SLWE-PL - preload

DryLin® SLWE-PL - preloadigus 12.09.2022